Description Skytron 6500 Surgical Table **Fully Refurbished** Base Removed all components from the base Sandblast, prime and paint base casting (Using high quality Polyurethane paint) Rebuild all floor lock cylinders and replace the rubber feet Replace all seal washers in the hydraulic manifold Rebuild the emergency release valve Disassemble wheel/caster assemblies. Sandblast, prime and paint Re-assemble all 4 caster/wheel assemblies. Lubricate and ensure smooth movement of table Rebuild the main lift hydraulic cylinder Replace power cord (20′ molded hospital grade) Polish stainless base cover to look like new Replace all decals Column Remove entire column from table base and tabletop Polish and lubricate (Very important for smooth operation) Polish all shrouds to look like new Replace all decals Tabletop Remove all side rails Remove all upper castings Sand, Prime and Paint (Using high quality Polyurethane paint) Polish all pivot points and clevis holes Remove headboard and sand prime and paint Rebuild all leg, back, kidney, Lateral tilt and trendelenburg hydraulic cylinders and paint Rebuild hand control (Like new) Replace Velcro for pad-set Chrome the leg pins (Prevents debris from building and easy to clean) Polish all side rails and spacers to look like new Check all hydraulic cylinders and fittings Check all return to level switches and replace as necessary Calibrate the return to level Completion Attach the base, column and top. Secure all fasteners using the appropriate thread locker Check all wire connections and secure Affix all new decals Calibrate speed adjustments for smooth table operation Perform an electrical safety test (Very important for bio-med) Install new 3″ Memory foam pad set Send through our quality control department
